Figure 3-4. Test setup for nonradiation operation.

NAVSHIPS 0967-217-4010

TM 11-5895-490-20

( 3 ) Disconnect the AN/APM-123A(V)

Note: The antenna test hood is to be used only for

the specific type antenna for which it is designated.

antenna rf cable from the PROBE

jack (fig. 33) and connect this cable

(1) R e l e a s e the AN/APM-123A(V)

to one end of the CG-409G/U rf

cover latches and remove the cover.

cable.

(2) Remove the CG-4096G/U rf cable and

(4) Connect one end of the CN-1088/

antenna test hood from the cover

U fixed attenuator through a UG-

and connect one end of the rf cable

1108/U adapter to the ANT. J5 in-

to the test hood using attenuator

put of the RT-859/APX-72. Con-

(3) Disconnect the AN/APM-123A(V)

nect the other end to the CG-409G/

antenna rf cable from the PROBE

U rf cable.

jack (fig. 33) and connect this cable

c. Test Setup for Nonradiation Operation,

to the other end of the CG-409G/U

Antenna Hood Coupling. (fig. 3-4)

rf cable.

Test setup for nonradiation operation.

Change 1

3-7