Chapter 1. INTRODUCTION - TM-32-5865-061-24-P0015

TM 32-5865-061-24&P

INTRODUCTION

GENERAL INFORMATION

Section I.

1-1. SCOPE. This technical manual provides organizational, direct, and general

s u p p o r t maintenance information for the Receiver Set R-2197/MLQ-34 (shown in

figure 1-1), referred to herein as the Receiver Set. A functional description of

the Receiver Set and its circuit card assemblies is provided. Referenced publi-

c a t i o n s a r e l i s t e d i n A p p e n d i x A . A p p e n d i x B contains the Maintenance Allocation

C h a r t (MAC). T h e Repair Parts and Special Tools (RPSTL) is provided in Appendix

C. Appendix D is a list of expendable supplies and materials. Non-standard terms

and abbreviations are defined in the Glossary. An Index is provided. Operating

i n s t r u c t i o n s for the Receiver Set are provided in TM 32-5865-060-10, Counter-

m e a s u r e s Set, Special Purpose AN/MLQ-34 (System Operator's Manual).

1-2. MAINTENANCE FORMS AND RECORDS. Department of the Army forms and procedures

u s e d for equipment maintenance will be those prescribed in TM 38-750, the Army

Maintenance Management System (TAMMS).

1-3. DESTRUCTION OF ARMY MATERIEL TO PREVENT ENEMY USE. P r o c e d u r e s f o r d e s t r o y -

ing Army materiel are described in TM 750-244-2, Procedures for Destruction of

A r m y Materiel to Prevent Enemy Use (Electronics Command).

1-4. ADMINISTRATIVE STORAGE. T h e a d m i n i s t r a t i v e s t o r a g e r e q u i r e m e n t s a r e

described in TM-740-90-1, Administration Storage.

1-5. CALIBRATION. Not applicable.

1-6. REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR). EIR's will be

Instructions for prepar-

Prepared using SF 368, Quality Deficiency Report (QDR).

EIR's should be mailed directly to

i n g EIR's are provided in TM 38-750, TAMMS.

C o m m a n d e r , U.S. Army Electronics Readiness Activity, ATTN: SELEM-ME-F, Vint Hill

F a r m s Station, Warrenton, VA 22186. A r e p l y w i l l b e f u r n i s h e d d i r e c t l y t o y o u .

1 - 7 . REPORTING OF ERRORS. The reporting of errors, omissions, and recommenda-

tions for improving this publication by the individual user is encouraged.

e p o r t s should be submitted on DA Form 2028 (Recommended Changes to Publications

a n d Blank Forms) or DA Form 2028-2 located in the back of the manual and forwarded

d i r e c t to Commander US Army Electronics Materiel Readiness Activity, ATTN: SELEM-

M E - E , Vint Hill Farms Station, Warrenton, VA 22186-5141.