 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 engineering experience, demand data, or
b. Federal Stock Number, Column 2. The Federal
TAERS information.
stock number for the item is indicated in this
h. Illustrations, Column 8.
column .
(1) Figure number, column 8. Not used.
c. Description Column 3. The Federal item
(2) Item or symbol number, column 8. This
name, a five-digit manufacturer's code, and a part
column lists the reference symbols used
number are included in this column.
for identification of the item.
d. Unit of Issue, Column 4. The unit used as a
basis of issue (e.g. ea, pr, ft, yd, etc.) is noted in
4. Location of Repair Parts
this column.
a. When the Federal stock number is unknown
e. Quantity Incorporated in Unit Pack, Column 5.
folIow the procedures given in (1) through (3)
The actual quantity contained in the unit pack is
below.
noted `in this column.
(1) Use the table of contents to locate the
j. Quantity Incorporated in Unit, Column 6. The
repair parts list.
quantity of repair parts in an assembly is given in
( 2 ) [f the item or symbol number is available,
this column.
locate the item by scrutiny of column 8b
g. Maintenance Allowances, Column 7.
of the repair parts list.
(1) The maintenance allowance columns are
(3) If the item or symbol number are not
divided into subcolumns. The total
known, check the description column
quantity of items authorized for the
(col. 3) in the repair parts list to locate
number of equipments supported is indi-
the part. The parts in this column are
cated in each subcolumn opposite each
arranged in alphabetical order.
item. Items authorized for use as re-
b. When the Federal stock number is known,
quired, but not for initial stockage, are
use the repair part listing to find the repair part.
identified with an asterisk in the allow-
ance column.
5. Federal Supply Codes
( 2 ) The quantitative allowance for organiza-
This paragraph lists the Federal supply code
tional category of maintenance represents
and the associated manufacturer's name.
one initial prescribed load for a 15-day
period for the number of equipments sup-
Manufacturer
Code
ported. Units and organizations author-
06845 _ _ _ _ _ _ _ Bendix Corp., The Radio
Division.
ized additional prescribed loads will
75915_ _ _ _ _ _ Littelfuse, Inc.
multiply the number of prescribed loads
authorized by the quantity of repair
6. Index of Publications
parts reflected in the appropriate density
Refer to the latest issue of DA Pam 310-4 and
column to obtain the total quantity of
DA Pam 3107 to determine whether there are
repair parts authorized.
( 3 ) Subsequent changes to organizational
new editions, changes, or additional publications
pertaining to the equipment.
allowances will be limited as follows:
No change in the range of items is
7. Reporting of Equipment Manual improve-
authorized. If additional items are con-
ments
sidered
necessary,
recommendations
should be forwarded to Commanding
Reporting of errors, omissions, and recom-
General, U.S. Army Electronics Com-
mendations for improving this publication by the
mand, ATTH: AMSEL-ME-NMPAN,
individual user is encouraged. Reports should be
Fort Monmouth, N.J. 07703, for ex-
submitted on DA Form 2028 (Recommended
ception or revision to the allowance list.
Changes to DA Publications) and forwarded
Revisions to the range of items author-
direct to Commanding General, U.S. Army
ized will be made by the USA ECOM
Electronics Command, ATTN: AMSEL-ME-
National Maintenance Point based upon
NMP-AD, Fort Monmouth, N.J. 07703.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals