F i l t e r Assemblies (A10, A11)
5-8.1.4 Cable Assembly A10W1 or A11W1, Removal/Installation. To remove/install W1,
carry out the following steps:
Remove cover, refer to para 5-8.1.1.
Remove and retain the six screws, flat washers, lock washers and spacers
securing A1 and A2 printed circuit boards to the chassis.
Carefully lift A1 and A2 to access wiring.
Refer to A10 wire list, table 5-10 or A11
U n s o l d e r W1 wiring from A1 and A2.
wire list, table 5-10.1.
D i s c o n n e c t W1E1 from terminal E1.